Motorola DS3478 - Manual (Page 237)

Symbologies 13 - 65
Data Matrix
To enable or disable Data Matrix, scan the appropriate bar code below.
Data Matrix Inverse
This parameter sets the Data Matrix inverse decoder setting. Options are:
• Regular Only - the scanner decodes regular Data Matrix bar codes only.
• Inverse Only - the scanner decodes inverse Data Matrix bar codes only.
• Inverse Autodetect - the scanner decodes both regular and inverse Data Matrix bar codes.
*Enable Data Matrix
Disable Data Matrix
NOTE If you enable DPM Scanning on page 5-5 , the scanner behaves as if the Inverse Autodetect setting is
selected. When you disable DPM Scanning, the previous (user-selected) Data Matrix Inverse setting
remains in effect.
*Regular
(00h)
Inverse Only
(01h)
Inverse Autodetect
(02h)