Maytag SMOOTHTOP 500 - Manual (Page 16)

15
Timer
The timer can be set from one minute (0:01) up to 99 hours
and 59 minutes (99:59).
The timer can be used independently of any other oven
activity. It can also be set while another oven function is
operating.
The timer does not control the oven. It only controls a beeper.
To set the Timer:
1. Press the TIMER pad.
• 0:00 lights in the display.
• The colon will flash.
2. Press the
▲ or ▼ pad until the
correct time appears in the display.
• The colon will continue to flash.
3. Press TIMER pad again or wait four seconds.
• The colon continues flashing and the time begins
counting down.
• The last minute of the timer countdown will be displayed
as seconds.
4. At the end of the set time, one long beep will sound.
To cancel the Timer:
1. Press and hold the TIMER pad for three seconds.
OR
2. Press the TIMER pad and set the time to 0:00.
Locking the Controls
The touchpad controls can be locked for safety, cleaning, or
to prevent unwanted use. They will not function when locked.
If the oven is currently in use, the controls cannot be locked.
The current time of day will remain in the display when the
controls are locked.
To lock:
Press and hold the CANCEL and COOK &
HOLD pads for three seconds. (Press the
CANCEL pad first.)
To unlock:
Press and hold the CANCEL and COOK &
HOLD pads for three seconds. (Press the CANCEL pad first.)
Fault Codes
BAKE or LOCK may flash rapidly in the display to alert you if
there is an error or a problem. If BAKE or LOCK flash in the
display, press the CANCEL pad. If BAKE or LOCK continue to
flash, disconnect power to the appliance. Wait a few minutes,
and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized
servicer.
Bake
To set Bake:
1. Press the BAKE pad.
• BAKE will flash.
• 000 will light in the display.
2. Select the oven temperature. The oven
temperature can be set from 170° to 550°.
Press or press and hold the
▲ or ▼ pad.
• 350° will light when either pad is first pressed.
• Press the
▲ pad to increase the temperature.
• Press the
▼ pad to decrease the temperature.
3. Press BAKE pad again or wait four seconds.
• BAKE will stop flashing and light in the display.
• 100° or the actual oven temperature will display. It will
rise in 5 degree increments until the preset temperature
is reached.
4. Allow the oven to preheat for 8-15 minutes.
• When the set oven temperature is reached, one long
beep will sound.
• To recall the set temperature during preheat, press the
BAKE pad.
5. Place food in the oven.
6. Check cooking progress at the minimum cooking time.
Cook longer if needed.
7. When cooking is finished, press CANCEL.
8. Remove food from the oven.
When the clock display is canceled, press the CLOCK pad to
briefly display the time of day.
To restore the Clock display:
Press and hold the CANCEL and CLOCK
pads for three seconds. The time of day
will reappear in the display.
Oven Cooking