Maytag MD-1 - Manual (Page 6)

5
Using the Controls - Sensor Models
STEP 1
STEP 2
Select Temperature
In order to select the correct temperature, turn the
Temperature control to one of four choices; Regular,
Medium, Low or Air Fluff.
DRYER TEMPS
Regular
Medium
Low
Air Fluff
LOAD TYPE
Sturdy cottons or labels marked
Tumble Dry.
For wrinkle-free/permanent press
synthetics, lightweight cottons or
items labeled Tumble Dry Medium.
For heat sensitive items labeled
Tumble Dry Low or Tumble Dry
Medium.
Items which need freshening.
Load tumbles with room
temperature air. Use the Time
Dry/Air Fluff cycle.
Select Options
Extended Tumble
Extended Tumble is provided to minimize wrinkles in
the Sensor Wrinkle Control cycle. This feature provides
an extra 60 minutes of unheated tumble action at the
end of the cycle. Clothes can be removed any time
during this portion of the cycle.
The additional 60 minutes of unheated tumbling can
be canceled by turning the knob to Off or opening the
door.
End of Cycle Chime
When the cycle is complete, a chime will sound. The
End of Cycle Chime can be turned off by turning the
selector knob to Off.
Remove load immediately to reduce wrinkling.
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using a Sensor Wrinkle Control cycle, the
control dial should point between More Dry and Less
Dry for most loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Sensor Regular
The Sensor Regular cycle is designed to dry most
cottons and linens. At the end of the cycle, the clothes
are cooled to reduce wrinkling.
Sensor Wrinkle Control
The Sensor Wrinkle Control cycle is designed to dry
wrinkle-free cottons, synthetic fabrics, double knits and
permanent press fabrics automatically. At the end of
the cycle, the clothes are cooled. If the load is not
removed from the dryer and Extended Tumble has
been selected, the cycle will advance to Extended
Tumble which provides additional unheated tumbling
time. (See Step 2).
STEP 3