Minicom Advanced Systems DX User IP - Manual (Page 47)

USER GUIDE
46
· Server's power state
· The following actions can be initiated via SNMP:
· Reset server
· Power on/off server
· Reset DX User IP
The following events are reported by DX User IP via SNMP:
· Login trial at DX User IP failed
· Login trial at DX User IP succeeded
· Denying access to a particular action.
· Server was reset.
· Server was powered on/off
From the DX User IP Menu choose SNMP settings. The SNMP Settings appear. See
Figure 36.
Figure 36 SNMP settings
You can change the following parameters:
Enable SNMP Agent - When checked, DX User IP will answer to SNMP requests.
If a community is blank, you cannot perform the request. E.g. if you want to disable
the possibility to reset DX User IP via SNMP, don't set a write community.
Read Community - This is the SNMP community, which allows you to retrieve
information via SNMP.