Mach Speed Technologies V5000 - Manual (Page 32)

31
System Settings
In the main menu, select the "Settings" option and briefly press the wheel button to
access the Settings menu.
1. About this Unit
In this interface you can view the information on the capacity of the disk, the
available capacity of your SD card, model and firmware version of the player.
2. Language
Allows you to change the display language.
3. Key sound
Allows you to set whether an audio sound will play when a button is used
4. Display output
Allows you to select which output option you wish to use, either AV out, or HDMI
out
5. LCD Auto close
This power savings setting will allow you to adjust how long the screen will stay lit
once the buttons are not being pressed. Setting this option to “Close” will leave the
screen on at all times.
6. LCD brightness
The player offers 0-5 different screen brightness levels to adjust brightness, 0 is the
faintest while 5 is the brightest, the higher the brightness of the screen, the greater
the player's power consumption
7. Auto off
This power savings setting will allow you to set a time for the player to power off
after the device is idle
8. Save setting
This feature allows you to save your settings, even if the power switch is set to the
OFF position. We recommend using this anytime you make a settings change.
9. Restore to Default
To restore the factory default stat