Marantz 541110307024M - Manual (Page 14)

12
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
NAMES AND FUNCTIONS
OTHERS
ADV
ANCED
OPERA
TIONS
ENGLISH
REMOTE CONTROL UNIT SETTING
RECALL
1 - 5
• To set CODE2
Press RECALL button and Numerical button 2 on
the remote controller at a time for fi ve seconds or
more.
• To set CODE3
Press RECALL button and Numerical button 3 on
the remote controller at a time for fi ve seconds or
more.
• To set CODE4
Press RECALL button and Numerical button 4 on
the remote controller at a time for fi ve seconds or
more.
• To set CODE5
Press RECALL button and Numerical button 5 on
the remote controller at a time for fi ve seconds or
more.
Caution
To reset the remote control to CODE1, press
RECALL
button and Numerical button 1 on the
remote controller at the same time for fi ve seconds
or more.
CC4003 SETTING
RECALL
PROGRAM
• To synchronize the remote control code of
a CC4003 with the corresponding remote
controller, simultaneously press the PROGRAM
and RECALL buttons on the remote controller.
• The remote control code set is displayed on the
display window on the unit for fi ve seconds, and
the setting is completed.
DISPLAY EXAMPLES
• When the remote controller is set to
CODE1
• When the remote controller is set to
CODE2
• When the remote controller is set to
CODE3
• When the remote controller is set to
CODE4
• When the remote controller is set to
CODE5
ADVANCED OPERATIONS
REMOTE CONTROL CODE SETTING
• The unit and remote controller have fi ve sets
of built-in remote control codes for each. These
codes enable up to fi ve CC4003s installed in the
same place to be controlled independently.
• To use multiple units at the same time, set the
second, third, forth, and fi fth CC4003s and their
remote controller’ remote control codes.
• To set the codes, follow the procedure below to
control only selected unit is remotely controlled.
• At the factory, the unit and remote controller
were set to CODE1.