MITSUBISHI ELECTRIC DX-TL4516U - Manual (Page 43)

40
Search by Motion
By specifying the motion detection conditions for playback,
you can search the picture with the motion which meets the
specified condition. For this function, the camera number and
start time need to be specified to search. The search result is
displayed in frame still playback of the single screen display.
A + D
6
B
Search 1
steps 1, 2, 4
step 3
Search by Motion
Motion Detection Settings
Motion Mask Setting
User Menu
step 1. Set the camera number to be searched.
step 2. Set the time for start searching.
• To search from the oldest recording point, select
“Oldest.”
• When the search start point is set to the earlier
time than the recording start point, the search is
executed from the oldest recording point.
step 3. Set the motion detection conditions for playback.
• Set motion mask setting, sensitivity, and motion
threshold. See page 56 for the details of
these settings.
• The sensitivity of motion detection conditions for
playback has two setting items, “Low” and “High.”
• The motion detection settings for recording
(Motion A or B) can be copied. To copy the
settings for recording, display the desired setting
in “Same as Recording Setting” and then select
“same.”
The sensitivity setting for playback is set to
“High” when the setting for recording of “High,”
“Mid High,” or “Mid” is copied, and is set to “Low”
when the setting for recording of “Mid Low” or
“Low” is copied.
step 4. Select “Search.”
Search (continued) User Menu