Minicom Advanced Systems Smart CAT5 - Manual (Page 20)

SMART CAT5 SWITCH – 108/116
19
To change the Serial port setting:
1. Navigate to the Serial port line.
2. Toggle between the options using the Spacebar.
4.2.4.9 Changing the Keyboard language
In the OSD the names of the computers can be written in 3 different languages –
English (EN), German (DE), and French (FR). The keyboard is preset to English; this
can be changed as follows:
1. Navigate to the Keyboard language line.
2. Toggle between the options using the Spacebar.
4.2.4.10 Editing the Switch name
You can substitute up to 18 characters in the line. A space constitutes a character.
When there is more than one switch in the system give each Switch’s OSD a different
name.
4.2.5 F7 Defaults
Press F7 to return the OSD to the factory default settings. Note! All changes made
will be removed.
4.2.6 The Ports settings
From the General Settings, return to the Settings window by pressing Esc. Navigate to
the Ports line and press Enter. The Ports settings window appears see Figure 16.
Figure 16 Ports Settings window