Motorola MD4160 Series - Manual (Page 21)

6
In
sta
lla
tio
n
Installation
1 Select a location convenient to both an electrical
outlet and a telephone jack.
2 Insert the telephone and power cords into the
bottom of the Base Unit.
3 Plug the telephone cord into the telephone
wall jack.
4 Plug the power cord into the electrical outlet.
Note: Install the Base Unit away from electronic
equipment, such as computers, televisions, or
microwave ovens. Avoid excessive heat, cold, dust,
or moisture.
Do not plug the telephone cord into the wall jack
until the Handset is fully charged (12 hours).