Motorola V700 - Manual (Page 6)

19
Setting the Message Alarm
This feature allows you to set a one-time or daily alarm for a selected
personal message. You can set an alarm for up to five personal messages.
To Set a One-time Message Alarm


Press
Ë
.

Press H or I to select the message you want to alarm.

Press
K
.

Press I to move the cursor to d .

Press
K
to display the set-message-alarm screen.
When the screen is first displayed, the cursor is at the far left position.
The symbol defines the alarm status—either alarm on (
c ) or alarm off
(
Ã
).

From the set-message-alarm screen, follow the same steps described
in Setting the Alarm. P
A
GER ALAR
MS
20
To Set a Daily Message Alarm
Follow the instructions above to set the alarm time, then follow the
instructions in “To Set the Alarm to Alert Daily” under Setting the Alarm.
The
b
symbol replaces the m symbol when the message alarm is set.
At the selected time, your pagers vibrates or emits a 12-second alert,
depending on the current alert mode.
Press
Ë
to display the message for which the alarm is set.
Note: If the alarm expires without being acknowledged, the
Ö
flashes until
the message is read.
PAG
ER AL
AR
MS
21
Setting Auto On/Off
To set your pager to turn on and off automatically.


Press
K
to display the Features menu.

Press
ä
to move the cursor to
å
.

Press
K
to display the auto on/off screen.
When the screen is first displayed, the cursor is at the farthest left position.
The on (
å
) or off (
õ
) symbol indicates the current status.
ON OFF
х
0:00 ф 0:00 ф
Example of Auto On/Off Screen
PAGER A
U
TO ON
/OF
F
22

Press F or G to select
å
or
õ
.

Press
ã
to move the cursor to the hour digit. The Auto On time is
displayed on the left and the Auto Off time is displayed on the right.

Press F or G to adjust the hour.

Repeat the process for each set of digits for both the on time and the
off time (hour, minute, AM/PM if your pager is set to display time in the
12 hour mode).

Press
K
to activate auto on/off.
The
å
symbol is displayed if the auto on/off feature is set to on. If the on
time is equal to the off time, the pager does not enable the auto on/off
feature.
PAG
ER AU
TO
ON
/O
F
F