Impex PREMIER - Manual (Page 12)

STEP 7 (See Diagram 7 & Cable Loop Diagram)
A.) Attach one end of the 77” Butterfly Cable (#28) to the slot on the Right Butterfly Support
Bracket (#10). Draw the Cable towards the right open bracket on the Upper Frame (#4).
B.) Attach a Pulley (#64) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#69), two
∅
¾” Washers (#81), and one M10 Aircraft Nut (#84).
C.) Draw the Cable over the Pulley and downward. Attach the Cable to a Single Floating Pulley
Bracket (#22). Install a Pulley as described in B. Let the Bracket hanging for now.
D.) Draw the Cable around the Pulley and upward to the left open bracket on the Upper Frame.
Install another Pulley as described in Step B above.
E.) Draw the Cable over the Pulley to the open slot on the Left Pulley Support Bracket (#10).
DIAGRAM 7
11