Invacare 9800A User Manual
Page 2
899 Cleveland Street
P.O. Box 4028
Elyria, Ohio 44036-2125
Phone 1-(800)-333-6900
Form No. 95-166
Part No. 1060540
Printed in U.S.A.
ASSEMBLY OF THE EXISTING PUMP, NEW
BOOM AND SWIVEL BAR ASSEMBLIES
Pump Assembly
1. Using the nut and bolt provided, assemble the
pump to the new boom. Refer to FIGURE 2.
Boom Assembly (FIGURE 4)
CAUTION
The boom and mast when assembled MUST
pivot easily.
2. Tighten the bolt and nut using an Allen wrench and
an adjustable wrench.
NOTE: The nut and bolt can be tightened
completely and the boom assembly will pivot easily
if the mounting hardware is aligned properly when
the boom assembly is secured to the mast. To check
for correct alignment of the hardware, use an Allen
wrench and turn the bolt by hand (it should rotate
without a lot of force being applied). If excessive force
is necessary, the bolt is NOT aligned properly.
Disassemble and repeat assembly procedures until
proper alignment is obtained.
1. Align the holes of the boom assembly and mast as-
sembly mounting bracket. Insert the bolt
completely through the holes of the mast
assembly mounting bracket and the boom
assembly.
NOTE: Be sure that the bolt is completely through
the holes of the mast assembly mounting bracket
and boom assembly; and they are not riding on the
shoulder of the bolt.
FIGURE 4 - NEW BOOM INSTALLATION
FIGURE 5 - SWIVEL BAR ATTACHMENT
WITH MOUNTING BRACKET
Swivel Bar
Pad
Pin
NOTE: Make sure Pin and Washers are completely
pushed UP through the Swivel Bar Pad.
1. Pull the pin up through the swivel bar pad.
2. Line-up hole in pin with mounting bracket holes
and secure with shoulder screw and nut
provided.
NOTE: The swivel bar has hooks on both ends
to accept the hardware used to attach the sling
that supports the patient during lift. The swivel
bar pad should remain in place during normal
use.
Swivel Bar Attachment with Mounting
Bracket (FIGURE 5)
NOTE: Refer to Owner's Manual for proper
operation of your patient lift.
Shoulder
Screw
Nut
- LC34
- 2GT
- 1055947
- 9000 Topaz
- 1145549
- 6027
- 01-349
- Compass XE
- BUZZ HMV
- Excel Power Sling Seat
- Front Anti Tippers 1326
- Wheelchair 3G Ranger X
- 6291E Adult
- 6845-5
- XtraTM 1026793
- Formula TRE
- 6300-5F
- 1048922
- Wheelchair XP6520
- 1141466
- F-6
- 95-1
- Auriga10
- XLT
- 1335
- 1069956
- CareGuard
- 1085144
- 1610
- Lightweight
- At'm
- 65100R-JR
- Crossfire T6A
- Comfort-Mate Extra / Comfort-Mate Extra Base
- IVC Heavy Duty Shower Chair 9781
- Lynx L-3X
- GET-U-UP LIFT
- V18PLR
- Excel
- 400
- 9000
- 4M900
- A1541
- ITFG
- 1300
- 1130268B
- 2000
- 9859
- A-65
- 6154
- Everyday HP Crossfire T6
- CTMT-FJ
- 1121271
- 1036793
- 6264
- Wheelchair Pronto M91 Base
- 00-313
- WALKING TUTOR WT 200
- Essential Series
- Wheelchair Pronto M61
- LYNX SX-3
- At'm QT
- 1073913
- M51
- Wheelchair Accessories
- IH6065
- 1095345
- HMV Highly 400
- Xterra GT
- 9000XT RECLINER
- Infinity Back Support
- Lynx L-4
- ITSM
- A4 Titanium
- AX3
- 6270E
- I.V./O2 1487
- Variance Plus
- Electric wheelchair
- Xterra Series
- 3G Torque
- Compass SPT PHW93
- 1514
- Arrow
- Fixed Released Rail/Cane Clamps
- 6211
- Articulating/Elevating Legrest
- Formula
- Lynx L-3
- Arrow FWD
- 1110154
- 9153644014
- Deluxe Three-Position IH6065 series
- Compass SPT
- ESS-PTO
- Infinity Series
- 1038599
- A-TTM
- 220
- 3G Storm Series
- Growth Bracket
- A-6
- Camlock Upgrade Kit 1052250
- 65950
- DBA
- Lap Tray
- 6252
- 1049522
- Basic Tilt
- A4TM
- Xtra
- Wheelchair Atlas
- Wheelchair Solara
- Adult Lap Belt
- 9000 XDT
- Lightweight Aluminum Wheelchair
- IVC Tracer SX5
- 300
- KSS
- 3000
- 9000 SL
- DLX
- Discontinued 1/00
- 9000 Jymni
- 1305L
- 7400037
- LYNX SX-3 EU