IOGear GUIP201 M1023 - Manual (Page 20)

20
1. Connect the USB cable on your USB device
to the USB port on the USB Net Share
Station, and make sure both the USB device
and the USB Net ShareStation are powered
on. The USB device will then show up on
the IOGEAR USB Server utility underneath
the “IOGEAR GUIP201.” as a green icon.
The green icon indicates that the USB
device is ready to be connected. If for any
reason the USB device does not show up,
please click the “Search” button to refresh
the control center.
Note: If your USB device does not show up on
the list, please try to disconnect and reconnect
the device to the GUIP201. Also, please make
sure the USB Net ShareStation and your USB
device are powered on.
Connecting to a USB device