InSciTek Microsystems Allworx Phone - Manual (Page 26)

Phone Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be
trademarks or registered trademarks of their respective owners.
Revised: March 28, 2007
Page 22
i. On Hook Dialing – Speakerphone mode will be enabled when a number on the keypad is pressed.
Allows numbers to be dialed without pressing the Speaker button first.
i. Enabled (Default)
ii. Disabled
j. Visual Ringing – The Allworx visual ring indicator for the 9112 phone will flash red with an incoming
call.
i. Enabled (Default)
ii. Disabled
k. Paging Enable Mode – If the phone is to allow pages to be heard.
i. Never
ii. Always (Default)
iii. On Hook
l. Off Hook Ringing – The phone will ring when a new call is received while in use.
i. Enabled (Default)
ii. Disabled
m. Auto on Hold – When another call comes in on a free Call / Line Appearance PFK while on an
active call, if the PFK for the new call is pressed, the first call is automatically put on hold instead of
ended.
i. Enabled (Default)
ii. Disabled
n. Auto Retrieve Calls – When the phone is on hook and a call is on hold, if handset is taken off hook,
the call on hold is automatically retrieved.
i. Enabled (Default)
ii. Disabled
o. Missed Call Tracking – Can choose what types of Appearances to track.
i. Call Appearances Only (Default)
ii. All Appearance Types
p. Parking Orbit Popups – Displays the Parking Orbit after call has been parked.
i. Popup Enabled (Default)
ii. Popup Disabled
q. Hold Button Operation – Set the Hold button functions.
i. Hold then Park
ii. Park then Hold
iii. Hold Calls Park Lines (Default)