Using remote controller – Integra DTR-7.3 User Manual

Page 62

Advertising
background image

62

DVD Mode

Setup

On

Standby

Top Menu

Disc

ENTER,

Return

Audio Sel

Angle

VOL

Muting

Menu

Subtitle

Search

Using remote controller

Controlling an Integra/Onkyo DVD player

The

connector of the Integra/Onkyo DVD player must be

connected to the DTR-7.3 (see page 26).

1. Press the DVD Mode button.

The DVD Mode button lights.

2. Press the desired operation button.

The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Integra/Onkyo DVD
player.

Operation buttons:

On: Turns DVD player on and off

Standby: Turns DVD player off (Some sets may not respond to this
button. In this case, use the ON button to put the DVD player in the
standby state.)

Setup: Displays the OSD of the DVD player

: Moves cursor in the OSD Menu of the DVD player

ENTER: Enter button for the OSD Menu of the DVD player

Return: Return button for the OSD Menu of the DVD player

Top Menu or Menu: Displays menu screens recorded on DVD
media

Disc

: Selects disc in DVD changer

Audio Sel: Selects audio or language track (if recorded on the DVD)

Angle: Selects a camera angle (if recorded on the DVD)

Subtitle: Selects subtitle language (if recorded on the DVD)

Search: Searches for location on disc to start playback

Random: Random playback

: Chapter/Track down

: Chapter/Track up

: Play

: Stop

: Fast reverse

: Fast forward

: Pause

: Opens/closes the disc tray

0, 1 to 9, +10: Numeric keys

You may also use the following buttons:

VOL

: Adjusts volume at DTR-7.3

Muting: Activates muting function at DTR-7.3

Note:
When operating an Integra/Onkyo DVD player directly with the
remote controller without connecting the

terminals, pre-

programming is necessary (see page 65).

DVD
operation
buttons

Numeric keys

Advertising