Invacare Force - Manual (Page 19)

SECTION 3—SAFETY INSPECTION
Part No 1114850 19 Recumbent Handcycle Series
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Inspect upholstery for rips or sagging.
❑ Clean upholstery with light detergent and water.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Ensure that casters are free of debris.
Inspect/Adjust Weekly
❑ Inspect parking brake ‐ Adjust brake shoes to front rim. Check for worn or missing
shoes. Check for wax or oil on rim.
❑ Ensure cable anchor is attached securely to brake arm.
❑ Ensure internal stopping brakes engages easily.
CAUTION
As with any vehicle, the wheels/casters and tires should be checked periodically for
cracks, flat spots and wear, and should be replaced.
❑ Ensure axle nuts are tight. Wheel should be centered in fork. Keep wheel bearings
adjusted and keep spokes tight and wheel in proper alignment.
❑ Inspect rim and fork assembly for damage.
❑ Ensure axle nut and wheel mounting nuts are secure.
❑ Inspect wheels for excessive side movement or binding when lifted and spun.
❑ Inspect for flat spots, wear and proper inflation.
❑ Inspect chain/chain guard for damage, rust, tension and stretch. Adjust if necessary.
Lubricate each link (3‐in‐1 oil or a quality bike lubricant). Check for damage or
looseness.
❑ Adjust shifter/brake cables according to shifter/brake manufacturerʹs instructions
(included with the handcycle).
❑ Inspect front fork. Keep tight and lubricate (All purpose grease).
❑ Inspect footrest mounting hardware is tight and footrest secure.
❑ Inspect footrest straps for wetness and/or damage.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Inspect upholstery for rips or sagging.
❑ Ensure that casters are free of debris.