IOGear GCS1758 - Manual (Page 33)

30
• F1 GOTO:
GOTO allows you to switch directly to a port
either by keying in the port’s
Name , or its Port ID .
- To use the Name method, key in 1; key in the
port’s Name; then press [Enter].
- To use the Port ID method, key in 2; key in the
Port ID ; then press [Enter].
Note: You can key in a partial Name or Port ID. In
that case, the screen will show all the computers
that the User has
View rights to (see Set
Accessible Ports , p. 35), that match the Name or
Port ID pattern, regardless of the current List
settings.To return to the OSD Main Menu without
making a choice, press [Esc].
• F2 LIST:
The LIST function lets you broaden or narrow the
scope of which ports the OSD displays (lists) on the
Main Screen. Many of the OSD functions only operate
on the computers that have been selected for listing
on the Main Screen with this function. The choices and
their meanings are given in the table below: 3. Press [Esc] to return to the previous
menu level.
OSD Operation