InStep 11-EZ256 - Manual (Page 6)

6
Care and Maintenance
Check fasteners
After one hour of use, check all fasteners to make sure they are secure. Adjust if necessary.
Periodically check the stroller to ensure that it is in good operating condition.
To adjust the stroller from pulling to the left or right (not rolling
straight):
Loosen the front axle nuts and check to see that the tab washers are inserted in the holes of the front fork.
Point the front wheel forward or in the opposite direction the stroller is pulling, then tighten the nuts with an
adjustable wrench.
NOTE: Sometimes it is a very slight adjustment to eliminate the pulling and this step may need to be
repeated.
To clean seat and canopy:
If light cleaning is required, use a soft cloth with warm water and mild soap then air dry. Do not put into
washing machine. Do not put in dryer. DO NOT BLEACH.
To clean frame:
Wipe using a soft cloth with warm water and mild soap. Air dry. DO NOT USE polish or abrasives.
WARNING: If you have any questions concerning the safe use of this product, please contact
InSTEP LLC before using:
1-800-242-6110
InSTEP LLC
2425 Enterprise Drive
Suite 900
Mendota Heights, MN 55120