Indesit WI 101 - Manual (Page 9)

9
GB
Service
Tr
oubleshooting
Precautions
Care
Programmes
Detergents
Installation
Description
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 8).
The temperature can be lowered, or even set to a cold wash ( ).
Functions
To enable the functions, press the button corresponding to the desired function, according to the table below:
Function Effect Comments
Rapid
wash
Cuts the duration of the wash
cycle by 30%.
Anti
crease
This function allows you to
interrupt a programme (on
symbol ) keeping the
washing soaking in water
before the spin cycle. It is a very
useful button in particular
because it can be used for
delicates and synthetics. It is
only to be used with wash
programmes for synthetic
fabrics, silk and curtains when
it is impossible for you to take
the washing out immediately.
Before opening the washing machine door, finish the wash cycle
as follows:
Silk and curtains: press button Anticrease and the washing
machine will drain the water.
Synthetic fabrics: press button Anticrease if you want a spin
cycle, or turn knob PROGRAMME to symbol if you want the
water to be drained.
With “Daily wash” programme, this function is not enabled.
 The machine has an intelligent built in check for out of balance loads. To let protect your machine it may reduce the final spin
speed if an unbalanced load is detected.