I-Data ReRouter User Manual
Page 67

Problem Determination
ida ReRouter
67
ROUT0618I:
Remote device (printer) is not ready
Description:
An attempt to make a connection has failed.
Action:
Check the remote device and retry.
Note:
Make sure that a test page can be ejected from
the remote device.
ROUT0619E:
Cannot reach the specified destination
Description:
Connection to the remote device cannot be established.
Action:
Check the IP address
Check that the remote device is turned on
Ping the remote device
Note:
-
ROUT0700E:
Internal software error [...]
Description:
An internal software error has occurred.
Action:
Retry and if the problem persists contact your
point of purchase.
Note:
-
ROUT0800E:
Semaphore handling error [...]
Description:
An OS/2 system call has failed.
Action:
Re-start the ida ReRouter, re-start the OS/2.
If problem persist, contact your system administrator.
Note:
-
ROUT0801E:
Named Pipe handling error [...]
Description:
An OS/2 system call has failed.
Action:
Re-start the ida ReRouter, re-start the OS/2.
If problem persist, contact your system administrator.
Note:
-
ROUT0802E:
Timer handling error [...]
Description:
An OS/2 system call has failed.
Action:
Re-start the ida ReRouter, re-start the OS/2.
If problem persist, contact your system administrator.
Note:
-