JVC TH-A75 - Manual (Page 52)

48
JPEG disc playback
This system can play JPEG files recorded on a CD-R or CD-RW. We call such a disc a “JPEG disc” in this manual.
• Before using the remote control, press DVD to change the remote control operation mode for the JPEG disc
operations.
• When playing back a JPEG disc, set “MP3/JPEG” on the PICTURE menu of the choice menu to “JPEG” (see page 53).
• Turn on your TV, and select the correct input mode on the TV.
If “ ” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do.
7 NOTES for JPEG disc
• JPEG discs (either CD-R or CD-RW) require a longer read-
out time. (The time differs depending on the complexity of
the group (folder)/file configuration.)
• When making a JPEG disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This system supports “multi-session” discs (up to 5
sessions).
• This system cannot play “packet write” discs.
• This system can play JPEG files only with the following file
extensions: “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any upper
case and lower case combination (such as “.Jpg”).
• It is recommended to record a file at 640 x 480 resolution.
(If a file has been recorded at a resolution of more than 640
x 480, it will take a longer time to be shown.)
• If both JPEG files and MP3 files are recorded on a disc, set
the MP3/JPEG setting on the PICTURE menu to “JPEG.”
(See page 53.)
• This system can play only baseline JPEG files*. Progressive
JPEG files* or lossless JPEG files* cannot be played. Files
having other format may not be played back.
* Baseline JPEG format: Used for digital cameras, web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely used now.
• Some JPEG discs may not be played back because of their
disc characteristics or recording conditions.
Slide-show
You can see the still pictures one after another automatically
—slide-show.
NOTES:
• The following functions are not available for JPEG disc
playback:
Program play, random play, repeat play,
fast-forward/reverse playback, and on-screen bar
and choice menus
• If a black screen continuously appears in the slide-show
playback:
The file currently played may be non-baseline JPEG file.
In this case, select a playable file (a baseline JPEG file)
again. (e.g., pressing STOP or MENU to show the JPEG
control screen, etc.)
Note that it may take a long time to select another file.
• Some files on a JPEG disc may be shown distortedly.
From the remote control ONLY:
7 To start slide-show playback
Load an JPEG disc, then press PLAY.
The slide-show playback starts.
• Each file (still picture) is shown on the TV for about
3 seconds, then changed to the next file one after another.
After all files of one group have been played, files of the
next group are played back.
CHANNEL/ZOOM VOLUME TV VOL
TUNING
STOP
DIMMER
PAUSE
FF/ /REW
TV/VIDEO
1
MUTING
¡
REC
PLAY
DOWN UP
MEMORY STROBE
VFP
ENTER
ON
SCREEN
CHOICE
O.T.
REPLAY
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
L
S.WFR
R
Current group number Current file number
To skip groups forward
Press Cursor
3.
To skip groups backward
Press Cursor
2.
To skip files forward
Press FF/
¢ or Cursor ∞ (or ¢ on the center unit).
To skip files backward
Press
4/REW or Cursor 5 (or 4 on the center unit).
To stop slide-show playback temporarily
Press PAUSE (or 8 on the center unit).
To start slide-show playback again, press PLAY (or 3 on the
center unit).
To stop slide-show playback
Press STOP (or
7 on the center unit).
The JPEG CONTROL screen appears on the TV screen.
NOTE:
Press buttons for operating after a whole picture appears on the
display. The system cannot accept the operation even though you
press buttons while showing a picture.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
EN46-49.TH-A75[A]_f 02.10.11, 2:56 PM 48