JVC Everio GZ-HD40 - Manual (Page 59)


EN
Trouble Action
Recor
ding
The recorded subject is
too bright.
•
Set the backlight compensation to [OFF] if it is being used.
•
Set the brightness to the [–] side.
Cannot use spot
exposure control.
•
Keep the zoom ratio below [10x].
The color of the
recorded subject looks
strange.
•
If there are numerous light sources etc. behind the subject, set the
white balance to [MWB].
Digital zoom does not
work.
•
Change [ZOOM] to [40x] or [200x].
•
Deactivate effect and/or focus assist.
White balance setting
cannot be activated.
•
This cannot be used if [SEPIA] or [MONOTONE] are selected as
effects.
•
Do not use [TWILIGHT] from program AE.
The continuous shooting
speed is slow.
•
The continuous shooting speed will drop after continuous shots.
•
Continuous shooting speed may drop depending on the recording
media or under certain recording conditions.
A function cannot be
activated.
•
Check the indication that represents that function.
•
If the indication is flashing or off, you have selected two functions
that cannot be used together. Choose which of the functions to
use.
Video movement
appears jerky/like it is
frame dropping.
•
Make sure the icon that represents the function is displayed.
•
Deactivate [NIGHT] of Program AE, and set [SHUTTER SPEED]
to [AUTO] and [EFFECT] to [OFF].
Mosaic-type noise
occurs when recording
scenes with fast
moving or with extreme
changing in brightness.
•
Record videos with high quality mode, such as XP, FHD or 1440
CBR mode.
Displa
ys
The indication display
flashes or goes out.
•
You have selected two functions that cannot be used together.
Choose which of the functions to use.
The LCD monitor
appears blank.
•
Operate the camera.
If the camera is not operated for a certain length of time when
using the AC adapter, it will enter sleep mode, and the LCD
monitor will turn off.
The remaining battery
display is not correct.
•
Fully charge the battery, run it down, and then recharge it again.
•
If the camera is used for long periods of time in high or low
temperatures, or if the battery is repeatedly charged, the amount
of remaining battery may not be displayed correctly.