JVC RX-8012VSL - Manual (Page 43)

40
English
Setting the Basic Setting Items
(Also see pages 16 – 21)
1. Press MENU.
The MENU appears on the TV.
• Pressing one of the
5 / ∞ / 2 / 3 buttons also displays the
MENU.
2. Press
5 / ∞ to move
to “SETTING,”
then press
2 / 3.
The SETTING 1 appears.
3. Press
5 / ∞ to move
to the item you
want to set or adjust,
then press
2 / 3.
• To go to the SETTING 2
menu, move to “NEXT
PAGE,” then press 2 / 3.
• To go back to the SETTING
1 menu, move to
“PREVIOUS PAGE,” then
press
2 / 3.
On the SETTING 1 and 2
menus, you can do the
following:
SETTING 1 menu
“SUBWOOFER”: Set the subwoofer information (see
page 17).
“FRONT SPK”: Set the front speaker information (see
page 17).
“CENTER SPK”: Set the center speaker information (see
page 17).
“REAR SPK”: Set the rear speaker information (see
page 17).
“CNTR DELAY”: Adjust the delay time of the center
speaker output (see page 18). *
“REAR DELAY”: Adjust the delay time of the rear
speaker output (see page 18). **
“CROSSOVER”: Set the crossover frequency
(see page 18).
“ONE TOUCH OPR”: Set the one touch operation
(see page 21).
SETTING 2 menu
“DIGITAL 1/2/3/4”: Set the digital input terminal 1/2/3/4
(see page 19).
“VIDEO DVD”: Set the video input terminal for the
DVD player (see page 16).
“VIDEO DBS”: Set the video input terminal for the
DBS tuner (see page 16).
“LFE ATT”: Set the low frequency effect attenuator
level (see page 19).
“FL DISPLAY”: Shows the disc text information on the
display (see page 21).
Notes:
* You cannot select “CNTR DELAY” when “CTR SPK” is set to
“NONE” (see page 17).
** You cannot select “REAR DELAY” when “REAR SPK” is set to
“NONE” (see page 17).
4. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
EN36_46.RX-8012V[UW]_f 01.2.14, 11:53 AM 40