Jacuzzi J - 480 - Manual (Page 64)

Page 60
J-400 Series
C. Use Wireless Remote or Stereo to Operate iPod
Button Operation
Press Next Track
Press & Hold Fast Forward
Press x 2 Return to Beginning of Current Track
Press x 3 Recall Previous Tracks
Press 4
Pause (Press Again to resume Play)
19.6 Generic MP3 Player Operation
A. Connecting Your MP3 Player
Plug in any MP3 Player’s headphone output jack with supplied
cable into the auxiliary port as shown using the supplied audio
RCA cable (iPod shown for demonstration purposes only).
B. Setting Up The MP3 Player for Use
1. Select preferred song/album/playlist prior
plugging in MP3 Player and start playback.
2. Press “Source Button”
Source
on stereo receiver or
remote until the display reads “AU-1”.
Note: All external MP3 Playback operations are
performed solely by the MP3 Player with the exception of volume control and
“Source Button” selector, which can be controlled via wireless remote or on the
stereo receiver.
WARNING: Electrical Shock Hazard Exists!
Never install, handle or remove MP3 Player while hands are wet
or while sitting partially or fully immersed.
19.7 Troubleshooting
A. Unit will not turn-on
Make sure spa power is turned on, then check both harness fuses on back of
unit making sure they are the proper ratings:
• Yellow memory B+ line (1A fuse); Red ACC line (10A fuse).
• With spa power off, use a thin rod to press the reset button located under
the front panel.