JVC HR-DD865EK - Manual (Page 28)

28
AV1 IN/OUT
AV2 IN/DECODER
PAUSE
ANT. IN
RF OUT
R
L
AUDIO
OUT
JLIP SYNCHRO EDIT
DECODER VCR TV
EXT.1
This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver.
Connect a satellite receiver to the recorder's AV2 IN/DECODER connector and programme the timer on the satellite receiver; the
recorder starts recording when the signals input from the satellite receiver to the AV2 IN/DECODER connector, and when there is no
input signals the recorder stops recording and the power shuts off.
Automatic Satellite
Programme Recording
NOTE:
Refer to the instructions supplied with your satellite receiver.
Mains outlet
TV Aerial cable
Aerial connector
Satellite Receiver Unit
Satellite Cable
Outdoor Unit Aerial
Back of TV
21-pin AV input
connector (SCART)
RF OUT
ANT. IN
Back of Recorder
ADVANCED OPERATIONS (cont.)
IMPORTANT
When you set "AV2 SELECT" to "SAT" (
੬
pg. 36), it is possible to view a satellite broadcast with the TV set to its AV mode even
if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.