English, Assigning names to preset stations – JVC RX-80PGD User Manual

Page 26

Advertising

Page 23

English

Assigning Names to Preset Stations

You can assign a name of up to five characters to each preset station (from preset channel number 1 to 20).
When a preset station is tuned in, its assigned name will appear on the display.

On the front panel only:

1. Tune in a preset station (preset channel number 1 to 20).

See page 21 for details.

2. Press MEMORY (next to the TUNER button).

The preset channel number starts flashing.

Note:
If you press Control

while the preset

channel number is flashing, you can change
the preset channel number.

3. Press Control

# (or @) until the first character

position starts flashing.

4. Press Control

% / fi to select a character.

You can use characters listed below.

5. When a character you want appears, press

Control

# (or @).

The next (or previous) character position starts
flashing.

6. Repeat steps 4 and 5 to enter up to five characters.

7. Press MEMORY (next to the TUNER button) again, while the last selected character is

flashing, after you have assigned a name.

To erase the input characters

Insert blanks using the same procedure described above.

VISUAL CONFIRMATION

CH–

100

10k

MEMORY

TUNER