JVC RX-9010VBK - Manual (Page 73)

70
English
After pressing DVD
MENU (only for the
main room operations),
these buttons can be
used for the DVD
menu operations.
Note:
For detailed menu operations, refer to the instructions supplied with
the discs or the DVD player.
Note:
Refer to the manual supplied with your DVD player.
5. Try to operate your DVD player by pressing one
of the above buttons.
• DO NOT forget to turn on the DVD player before pressing
one of the above buttons.
If there are more than one code listed for your brand of DVD
player, try each one until the correct one is entered.
To change the transmittable signals for
operating a CD player
1. Press and hold AUDIO POWER ON.
2. Press CD.
3. Enter manufacturer’s code using buttons 1–9,
and 0.
See page 71 to find the code.
4. Release AUDIO POWER ON.
After pressing CD, you can perform the following operations on
a CD player:
1 – 9, 0, +10 : Selects the tracks.
PLAY : Starts playing.
1: Moves fast toward the beginning of the track.
¡: Moves fast toward the end of the track.
STOP : Stops playing.
PAUSE : Stops playing temporarily. To release it, press
PLAY.
Note:
Refer to the manual supplied with your CD player.
5. Try to operate your CD player by pressing one of
the above buttons.
• DO NOT forget to turn on the CD player before pressing one
of the above buttons.
If there are more than one code listed for your brand of CD,
try each one until the correct one is entered.
JVC 00 * , 14, 74
FISHER 05
HITACHI 08, 09, 10, 49
MAGNAVOX 08, 17, 49
METS 50, 51, 52, 53
MITSUBISHI 08, 18
PANASONIC 24, 26, 76
PHILIPS 17
QUELLE 52, 53, 54, 55, 56, 57, 58,
59, 60, 61, 62, 63, 64, 65,
66, 67
RCA/PROSC 08, 24, 29, 30, 31, 48
SAMSUNG 08, 34, 49
SANYO 05
SHARP 38, 77
SONY 39
TOSHIBA 37, 43
ZENITH 45, 46
Manufacturer Codes
Manufactures' codes for TV
Manufacturer Codes
JVC 56, 57 * , 67
AMSTRAD 43, 44, 45, 46, 47, 48, 49
BLAUPUNKT 30
ECHOSTAR 50, 51, 67
GOLDSTAR 31
GRUNDIG 32, 33
HIRSHMANN 48, 52, 53, 54, 55
INSTRUMENT 68
ITT/NOKIA 34
KATHREIN 52, 58, 59, 60, 61, 62, 63
NEC 35, 36
ORBITECH 48
PHILIPS 37, 38
RCA 65
SAMSUNG 39, 40
SCHWAIGER 61, 64
SIEMENS 41, 42
SONY 66
TECHNISAT 48
Manufactures' codes for DBS tuner
Continued to the next page.
*This figure is set to the remote control as the initial JVC code.
*This figure is set to the remote control as the initial JVC code.
SET
MENU
DVD
MENU
EXIT
TEXT
DISPLAY
Note:
Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
EN62-74.RX-9010VBK[C]f 01.4.13, 5:40 PM 70