JVC GR-DVX PRO - Manual (Page 68)

68
EN
TROUBLESHOOTING (Cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
11. Even though “GAIN UP”
was set to “ A ”, scenes
shot in dark places are
not brightened.
12. Snapshot mode cannot be
used.
13. Although the SNAPSHOT
button is pressed, the
white border does not
appear.
14. Digital Zoom doesn’t
work.
15. P.AE/Effects and Fade/
Wipe Effects don’t work.
16. The Black & White Fader
doesn’t work.
17. The Dissolve function
doesn’t work.
18. Scene transition does not
go as expected.
11. •Depending on the light
source, the 1/25 shutter
speed may be deactivated in
order to reduce the
shakiness in the picture.
12. •The Squeeze mode is
selected.
13. •"PHOTO FRAME" is set to
"OFF" in the system menu.
•The Cinema mode is
engaged, disabling the white
border.
14. •10X optical zoom is selected.
•The Video Echo effect is
activated.
•Picture Wipe or Dissolve
are being used in a scene
transition.
•5-Second recording was
done with the Power Dial
set to “5S”, and with “5SD”
selected in the System Menu.
•Snapshot Dissolve was
attempted during Digital
Zoom.
15. •The Power Dial is set to
“ A ”.
•The Power Dial is set to
“5S”.
16. •The Sepia or Monotone
effects are activated.
17. •P.AE/Effects Sepia,
Monotone or Slow are
activated.
•The Squeeze mode is
selected.
•The previously selected
P.AE/Effect was changed
after the last selected scene
for editing was registered.
18. •When using “Picture Wipe/
Dissolve” (
੬
pg. 38) or
“Dissolves during 5 second
mode recording” (
੬
pg. 28),
there is a delay of a fraction
of a second between the
previous record stop-point
and the Dissolve start-point.
This is normal, but this slight
delay becomes especially
noticeable when shooting
fast-moving subject or
during rapid panning.
11.
————
12. • Disengage the Squeeze
mode (
੬
pg. 31).
13. • Set “PHOTO FRAME” to
“ON” in the system menu
(
੬
pg. 35).
• Disengage the Cinema
mode (
੬
pg. 31).
14. • Turn off the Video Echo
effect (
੬
pg. 43).
• Wait until the Picture Wipe
or Dissolve effects are
completed (
੬
pg. 38).
• Change the setting of either
the System Menu or the
Power Dial (
੬
pg. 34).
• Do not attempt to take a
Snapshot when performing
Digital Zoom (
੬
pg. 25).
15. • Set the Power Dial to “
M
”
(
੬
pg. 18).
• Change the setting of the
Power Dial.
16. • Turn off Sepia and
Monotone (
੬
pg. 42).
17. • Turn off Sepia and
Monotone before adding
Dissolve to a scene
transition (
੬
pg. 42).
• Make sure that the Squeeze
mode in the Recording
Menu is set to “OFF”
(
੬
pg. 30).
• Make sure you have
selected the P.AE/Effects
you want before starting
editing (
੬
pg. 42).
18.
————