Jameco Electronics Superpro Series - Manual (Page 21)

L: Output Logic Low (Vol)
C: Clock pin
1: Input Logic High (Vih)
0: Input Logic Low (Vil)
2.4.2 Edit Pattern
This selection is used for editing a test pattern in the library. When you are in the Test
menu, click on Edit Pattern. This brings up the Select Chip to Edit dialogue box. It
consists of Select Type input line, a Device List viewer, and the OK and Cancel buttons.
You can enter the device name into the input line, or select from the list viewer. Upon
acceptation of the device name, the software opens the edit window with the name of the
device at the top. You may now use the above information to edit your pattern.
Figure20 .Edit Pattern
2.4.3 Delete Pattern
This selection deletes a test pattern in the library. Click on the Delete Pattern sub-menu
in the Test menu. This will bring up the Select Chip to Delete dialogue box. Highlight
the test pattern you wish to delete and click on the OK button. The test pattern will be