JVC LX-P1010ZE - Manual (Page 36)

36 Previous
screen
Setting the Screen Type
This LCD Projector is compatible with wide screen (16:9 ratio). If a
wide screen is used and you set the screen type to 16:9 in order to
project a wide (16:9) picture to fill the entire screen, pictures are
correctly projected within the screen when projecting older (normal)
4:3 ratio pictures. Please follow the instructions below to set the
screen type.
The procedure and on-screen display as below are based on
S-VIDEO/VIDEO as the input signal.
• Setting procedure
1
Press MENU to
display the menu.
2
Press or to
select “Function”,
and then ENTER to
display the screen.
3
Press or to
select “Screen”.
4
Press or to
change the screen
type.
• The 4:3 type
screen is set at
the factory.
Projection Mode
Screen
16:9
On Screen Display
Auto Lamp Off
Standard (Push ENTER) •Front •Rear
•4:3 •16:9
•ON •OFF
•ON •OFF
•YES •NO
Function
Picture
White Balance
Video System
Function
Language
Information