Setting clock manually — manual clock set, Setting clock manually, Initial settings (cont.) – JVC SR-VDA300U User Manual
Page 12
12
EN
CLOCK SET UP
TIME
DATE YEAR
– –:– –AM 1/ 1
2003
AUTO CLOCK : ON
HOST CH
: AUTO (CATV)
D.S.T.
: AUTO
TIME ZONE
: AUTO
PRESS (
5∞), THEN (2 3)
PRESS (MENU) TO END
Setting clock manually
— Manual Clock Set
First follow steps 1 to 3 on page 10, then go to the
following steps.
4
Set time
Press
@ # until the
desired time appears,
then press
fi.
● Holding @ # changes
the time in 30-minute
intervals.
● When the time is
entered manually, “AUTO CLOCK” is
automatically set to “OFF”, and “HOST CH”
and “TIME ZONE” disappear.
5
Set date
Press
@ # until the desired date appears, then
press
fi.
● Holding @ # changes the date in 15-day
intervals.
6
Set year
Press
@ # until the desired year appears.
7
Select D.S.T. mode
Press
%fi to move the highlight bar to “D.S.T.”,
then press
@ # to select “ON” or “OFF”.
ON–
Adjustment will be made by the built-in
clock itself.
OFF– Select when Daylight Saving Time does
not apply to you.
8
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press
%fi repeatedly until the item you want to change
blinks, then press
@ #.
1
2
3
4
5
6
7
8
9
0
VCR TV CABLE/DBS
8
INITIAL SETTINGS (cont.)
4 – 7
4 5
7
VDA300U-EN02-20
03.3.12, 4:08 PM
12