JVC 0503-FO-ID-VP - Manual (Page 47)

EN
47
Master Page: Right
NOTE:
If you are using the viewfinder, you should already
have performed “Viewfinder Adjustment”
(
੬ pg. 15).
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Press FOCUS. The manual focus indicator
appears.
3
To focus on a further subject, rotate the Manual
Focus Ring counterclockwise.
To focus on a nearer subject, rotate the Manual
Focus Ring clockwise.
To reset to Auto Focus...
Press FOCUS or set the Power Switch to “A”.
NOTES:
● Be sure to focus the lens in the maximum
telephoto position when you use the Manual
Focus mode. If you focus in on a subject in the
wide-angle position, sharply focused images
cannot be obtained when zoomed up because the
depth-of-field is reduced at longer focal lengths.
● When the focus level cannot be adjusted any
further or closer, “ ” or “ ” will blink.
Zooming manually using the Zoom Ring enables
controlling the shooting angle or zooming speed to
your preference.
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Zoom In
Rotate the Zoom Ring counterclockwise.
Zoom Out
Rotate the Zoom Ring clockwise.
NOTE:
Digital zoom cannot be used when the Recording
Mode Switch is set to “HD” or “MEMORY”.
(
੬ pg. 16)
Manual Focus
Lock Button
Power Switch
FOCUS Button
Manual Focus
Ring
Zoom Ring
While focusing on a
further subject
While focusing on a nearer
subject
Manual Zooming
AD
V
A
NCED FE
A
TURE
S
GR-HD1US.book Page 47 Monday, April 14, 2003 5:21 PM