Jet Tools Table Saw - Manual (Page 2)

The JET Deluxe XACTA Saw is a left-tilt machine,
meaning the blade tilts away from the fence. When cutting
bevels this allows the scrap to fall freely onto the table and
prevents your work piece from becoming trapped between
the fence and the blade insuring safer, burn-free cuts. This
puts you in full control of the major piece, insuring the
finest possible cut quality.
The standard throat insert plate
(left) is designed to work with the
full blade guard assembly in place.
The Dado insert plate (right) is
available as an accessory and
accommodates most stacked dado
sets at a full 13/16” width.
The throat plate is 15 5/16”-long by 4 1/4”-wide and
provides plenty of access for changing blades and working
with our high-tech modular riving knife and blade guard
assembly. The standard throat plate insert included with the
JET Deluxe XACTA Saw is designed to function with an
1/8” kerf blade at all available angles with the riving knife
in place, enhancing safety and performance.
Cabinet
An all-steel cabinet
encloses the mechanics of
the JET Deluxe XACTA
Saw. It also provides an
incredibly stable platform
for the saws massive
weight. A newly designed
hinged curved steel door
covers the motor on the
side of the JET Deluxe
XACTA Saw cabinet. This
door provides good access
for cleaning the cabinet
interior or making
adjustments and can be easily removed for additional access. When closed, the door
enhances dust collection.
A sealed drawer (left) makes use of often lost space in the lower portion of the
cabinet. Hangars (right) provide a safe, out of the way place to store the miter
gauge and fence when not in use.
A sealed drawer reclaims the often-wasted space in the lower portion of the cabinet. This
drawer provides handy, clean storage for frequently used tools and accessories. We also
included storage hooks on the side of the cabinet for the miter gauge and rip fence when
they are not in use.