John Deere ET-3407 - Manual (Page 11)

14-inch Abrasive Chop Saw Operator's Manual 11
Operation
(Fig. 4)
OPERATION:
1. SWITCH ACTION (Fig. 4):
A lock-on button is provided with your saw.
There are two ways you can operate your saw.
a. Short Periods of Cutting: Press trigger to
start your saw and operate it until you
release the trigger.
b. Long Periods of Cutting: Press trigger to
start your saw and have lock-on button
engaged for continuous operation, press
trigger again to stop your saw.
2. ADJUSTING CUTTING DEPTH OF CUTTING
WHEEL (Fig. 5):
Screw the adjustable screw clockwise, then
secure the bolt by tightening nut for deeper
cutting. for shallow cutting, screw the adjustable
screw counterclockwise.
3. USING CLAMP DEVICE TO SECURE WORK-
PIECE (Fig. 6):
Put work-piece in place and have clutch open,
then push clamp until touching work-piece. Have
clutch engaged and hold clamp handle to secure
work-piece by tightening clamp.
4. ANGLE CUTTING:
Loosen screw as shown in Fig. 7. Then adjust
fence to the required angle. Tighten screw.
Fence can be adjusted backward and forward to
meet your easy cutting.
5. SAFETY COVER (Fig. 8):
Always have movable cover in the lower position
for your personal safety.
(Fig. 5)
(Fig. 6)
(Fig. 8) (Fig. 7)
Screw
Screw
Nut