Activating the surround/dsp modes, When you select “auto surround, Selecting the surround/dsp modes – JVC RX-D401S User Manual

Page 39

Advertising
background image

37

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step

2 again.

1

Select and play any source.

• Surround/DSP modes are not available when multi channel

PCM (see page 34) signals recorded in DVD-Audio are
coming. See page 11 for details.

• Make sure you have selected the audio input mode (analog

or digital) correctly (see pages 16 and 17).

2

Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

3

Turn MULTI JOG to select the Surround/DSP
mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital

multi-channel software:

*

1

“AUTO SURROUND” is the initial setting.

*

2

Available Surround modes vary depending on the speaker
settings and the incoming signals. For details, see page
36.

*

3

If an incoming signal is a multi-channel (more than 2

channel) digital signal, “MONO FILM” is not available.

*

4

If “SURROUND SPK” is set to “

<

NO

>

,” “ALL CH STEREO”

is not available.

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURROUND OFF” appears on the
display.

When you select “AUTO SURROUND”

You can enjoy the Surround mode easily.
• For details about the Surround modes, see page 36.
• When “AUTO SURROUND” is activated, the AUTO SURR indicator

lights up on the display.

How does “AUTO SURROUND” work?
• If a multi-channel signal comes in, an appropriate Surround

mode will be selected automatically.

• If a Dolby Digital 2-channel signal with surround signal comes

in, “PLIIx MOVIE” or “PLII MOVIE” will be selected.

• If a Dolby Digital 2-channel signal without surround signal

comes in, “SURROUND OFF (stereo)” will be selected.

• If a Linear PCM signal comes in, “SURROUND OFF (stereo)”

will be selected.

NOTE

“AUTO SURROUND” does not take effect in the following cases:
– While playing an analog source,
– While selecting one of the fixed digital decode mode—“DOLBY

DIGITAL” or “DTS” (see page 18).

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker
settings and the incoming signals. For details, see page 36.

Activating one of the Surround/DSP modes automatically
recalls the memorized settings and adjustments.

• To adjust the speaker output level, see page 28.

• When activating one of the Surround/DSP modes, you

can adjust CENTER TONE (see page 30).

• When activating one of the Surround/DSP modes

(except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and
ALL CH STEREO),
you can adjust CENTER ALIGN (see
page 30).

• When activating “NEO:6 MUSIC”, you can adjust CENTER

GAIN (see page 30).

• When activating the DSP mode (except All Channel

Stereo mode), you can adjust the following settings:

EFFECT (see page 29)
LIVENESS (see page 29)
ROOM SIZE (see page 29)

• When activating “PLIIx MUSIC” and “PLII MUSIC”, you

can adjust the following settings:

CENTER WIDTH (see page 30)
DIMENSION (see page 30)
PANORAMA (see page 30)

Selecting the Surround/DSP modes

From the remote control:

1

Select and play any source.

• Surround/DSP modes are not available when multi channel

PCM (see page 34) signals recorded in DVD-Audio are
coming. See page 11 for details.

• Make sure you have selected the audio input mode (analog

or digital) correctly (see pages 16 and 17).

2

Press SURROUND repeatedly to select the
Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital

multi-channel software:

*

1

“AUTO SURROUND” is the initial setting.

*

2

Available Surround modes vary depending on the speaker
settings and the incoming signals. For details, see page
36.

*

3

If an incoming signal is a multi-channel (more than 2

channel) digital signal, “MONO FILM” is not available.

*

4

If “SURROUND SPK” is set to “

<

NO

>

,” “ALL CH STEREO”

is not available.

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURROUND OFF”
appears on the display.

L

LS

RS

S.WFR LFE

C

R

DIGITAL

DIGITAL AUTO

SURROUND OFF

(Back to the beginning)

Surround modes

*

2

AUTO SURROUND

*

1

HALL1

HALL2

LIVE CLUB

DANCE CLUB

PAVILION

THEATER1

THEATER2

MONO FILM

*

3

ALL CH STEREO

*

4

L

LS

RS

S.WFR LFE

C

R

DIGITAL

DIGITAL AUTO

SURROUND OFF

(Back to the beginning)

Surround modes

*

2

AUTO SURROUND

*

1

HALL1

HALL2

LIVE CLUB

DANCE CLUB

PAVILION

THEATER1

THEATER2

MONO FILM

*

3

ALL CH STEREO

*

4

1

2

1,3

2

33-37RX-D401S[J]_f.p65

05.7.4, 5:47 PM

37

Advertising