Jameco Electronics 487023U - Manual (Page 20)

Troubleshooting
Troubleshooting hints for Windows 98 can be
found below. The USB10T is not compatible with
any other operating system. Please see the dis-
claimer on page 4.
Troubleshooting Hints for Windows 98
Problem 1: Windows 98 doesn’t detect new hard-
ware with the USB Adapter hardware installed, or
it continues to detect the adapter each time you
restart your PC.
Solutions
You might not have installed the USB adapter cor-
rectly. Check that the USB cable and RJ-45 cable
are securely inserted into the appropriate ports.
You may have previously aborted a new hardware
setup. Reinstall the hardware.
The motherboard in your system might not be
USB enabled, your PC’s USB settings may not be
enabled, or the motherboard may have USB
options not supported by Windows 98. Your PC’s
USB port may not be supplying the Ethernet
Adapter with a sufficient amount of power.
If you are not sure, consult your PC user guide or
contact your PC’s manufacturer.
16
Appendix