Sagem F@ST 1500WG - Manual (Page 45)

3 - Configuring Client Computer
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Reproduction and communication prohibited without the written permission of E E E E Page 3-21
3) If “Using DHCP Server” is already selected in the Configure field, your computer is already
configured for DHCP. If not, select this Option.
4) Your new settings are shown on the TCP/IP tab. Verify that your IP Address is now
192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is
192.168.2.1. These values confirm that your SAGEM F@st
TM 1500 ADSL Router is
functioning.
5) Close the Network window. Now your computer is configured to connect to the
SAGEM F@st TM 1500 ADSL Router.
Disable HTTP Proxy
You need to verify that the “HTTP Proxy” feature of your web browser is disabled. This is so that
your browser can view the SAGEM F@st
TM 1500 ADSL Router’s HTML
configuration pages. The following steps are for Internet Explorer.
Internet Explorer
1) Open Internet Explorer and click the Stop button. Click Explorer/Preferences.
2) In the Internet Explorer Preferences window, under Network, select Proxies.
3) Uncheck all check boxes and click OK.