Snom 300 - Manual (Page 58)

s n o m 3 x 0 V o I P P h o n e s U s e r M a n u a l E n g l i s h
5 2 • Phone Configuration © snom technology AG 2007
English
Factory Reset
L Note: You should reset the phone only in the following situations:
• The phone configuration was changed and the phone is not functioning
anymore.
• The help desk of your vendor or snom partner advised you to do so.
Action: Reset the phone configuration to factory values
snom 300 snom 320 snom 360 snom 370
Enter the settings menu (see page 25) and navigate through the menu (see page 22)
until the following screen is displayed:
Configuration Reset 10 Maintenance 5 Reset Values
Press Press
Reset
S2
Press
Admin Mode Pwd Admin Mode Pwd — Admin Mode Pwd — Admin Mode Pwd time
Warning: If you confirm by entering the admin password all current setting changes
will be lost and your phone must be configured anew manually unless mass
provisioning is used!
Enter the administrator password and press
Result: The phone reboots and the phone configuration is resetted.
Rebooting… Rebooting…
Rebooting…
Rebooting…