Savin 4027 - Manual (Page 28)

Copying
18
2
Interrupt Copy
Use this function to interrupt a long copy
job to make urgently needed copies.
Limitation
❒ You cannot use Interrupt Copy
with the scanner function, or when
fax originals are being scanned.
AAAA
Press the
{{{{Interrupt}}}} key.
The Interrupt indicator lights.
When the originals stop scanning
A Remove the originals that were
being copied, and then place
the originals you want to copy.
B Press the {{{{Start}}}} key.
Copying starts.
C When copying is complete, re-
move the originals and copies.
D Press the {{{{Interrupt}}}} key again.
The Interrupt indicator goes
out.
E When the display prompts
you, place the former set of
originals again.
F Press the {{{{Start}}}} key.
Note
❒ The former copy job's set-
tings are restored and the
machine continues copying
from where it left off.
When the machine keeps
copying
A Place the originals you want to
copy.
B Press the {{{{Start}}}} key.
The machine stops the previous
job and starts copying the new
originals.
C When copying is complete, re-
move originals and copies.
D Press the {{{{Interrupt}}}} key again.
The Interrupt indicator goes
out.
The former copy job's settings
are restored and the machine
continues copying from where
it left off.
RuC3_ENcopy-F_FM.book Page 18 Monday, June 16, 2003 4:57 PM