Sharp Digital Laser Copier/Printer AR-5127 - Manual (Page 56)

AR-5127 SIMULATION 8 - 28
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
Operation/procedure
Shading is performed to turn on the copy LED.
The current exposure value of "Normal character, Auto exposure"
mode is displayed.
Enter an adjustment value of 2 digits with the 10-key and press the
START key, and the entered value will be set to all the modes and the
self print will be made in the normal size.
Exposure adjustment value table
When initializing each data: 50
Note: Executable only when the FAX is installed.
Operation/procedure
The FAX exposure level can be adjusted separately for each mode by
specifying a sub code. Since selection of Auto/Manual and Photo ON/
OFF is allowed separately for each mode, adjustments of 14 patterns
in total can be made.
(Refer to 46-12, "Exposure adjustment table".)
Shading is performed to turn on the copy LED.
The current exposure value of the selected mode is displayed.
Enter the 2-digit adjustment value with the 10-key pad and push
START key. The entered value is set for the specified mode, and the
self print is made with the same magnification ratio for the mode.
Note: Executable only when the FAX is installed.
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Auto adjustment)
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
* SUPER PHOTO (5:) cannot be executed.
When [OK] or [START] key is pressed, a caution buzzer sounds.
(Only the adjustment value can be entered.)
46-11
Purpose Adjustment
Function
(Purpose) Used to adjust individually the copy exposure level.
(Photo)
Item Picture quality Density
(Initial screen) (Input screen) (Executing screen)
Display items Content
Setting
range
Default
1:1.0(SHIFT) Photo level 1.0 (shift q’ty) 1-99 32
2:1.0(GAMMA) Photo level 1.0 (slant) 50
3:2.0(SHIFT)
Photo level 2.0 (shift q’ty) 41
4:2.0(GAMMA)
Photo level 2.0 (slant) 50
5:3.0(SHIFT)
Photo level 3.0 (shift q’ty) 50
6:3.0(GAMMA) Photo level 3.0 (slant) 50
7:4.0(SHIFT) Photo level 4.0 (shift q’ty) 56
8:4.0(GAMMA) Photo level 4.0 (slant) 61
9:5.0(SHIFT)
Photo level 5.0 (shift q’ty) 62
10:5.0(GAMMA)
Photo level 5.0 (slant) 66
46-12
Purpose Adjustment
Function
(Purpose) FAX exposure level adjustment (batch)
Mode AE Photo Exposure adjustment
STD
(Standard
character) Auto
ON –
Manual
Auto
OFF
Individual adjustment
enable
(46-13 to 16)
Manual
Fine
(Small
character) Auto
ON
Manual
Auto
OFF
Manual
S-fine
(Fine) Auto
ON
Manual
Auto
OFF
Manual
U-fine
(Super fine) Auto
ON
Manual
Auto
OFF
Manual
Sim46-11 PHOTO
1: 1.0(SHIFT) 50
2: 1.0(GAMMA) 50
3: 2.0(SHIFT) 50
1/4 50
46-13 to 16
Purpose Adjustment
Function
(Purpose) FAX exposure level adjustment (individual)
Sub code Mode
13 STD (normal character)
14 Fine (small character)
15 S-fine (super fine)
16 U-fine (super fine)
46-18
Purpose Adjustment
Function
(Purpose) Used to adjust the copy contrast. (Inclination)
Item Picture quality
(Initial screen) (Input screen) (Executing screen)
Display items Content
Setting
range
Default
1:AE AE 1-99 50
2:TEXT Character Level 3.0
3:TEXT/PHOTO Character/Photo Level 3.0
4:PHOTO
Photo Level 3.0
5:SUPER PHOTO * Super photo Level 3.0 Disabled
6:AE(TS) AE(TS) 50
7:TEXT(TS) Character (TS) Level 3.0
8:TEXT/PHOTO(TS) Character/Photo (TS) Level 3.0
Sim46-18 GAMMA SET.
1:AE 50
2:TEXT 50
3:TEXT/PHOTO 50
1/3 50