SMC Networks 16 10BASE-T - Manual (Page 240)

Command Line Interface
4-64
4
delete
This command deletes a file or image.
Syntax
delete [unit:] filename
filename - Name of the configuration file or image name.
unit - Specifies the unit number.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• If the file type is used for system startup, then this file cannot be deleted.
• “Factory_Default_Config.cfg” cannot be deleted.
• A colon (:) is required after the specified unit number.
Example
This example shows how to delete the test2.cfg configuration file from flash memory
for unit 1.
Related Commands
dir (4-64)
delete public-key (4-38)
dir
This command displays a list of files in flash memory.
Syntax
dir [unit:] {{boot-rom: | config: | opcode:} [:filename]}
The type of file or image to display includes:
• boot-rom - Boot ROM (or diagnostic) image file.
• config - Switch configuration file.
• opcode - Run-time operation code image file.
• filename - Name of the file or image. If this file exists but contains errors,
information on this file cannot be shown.
• unit - specifies the unit number.
Default Setting
None
Console#delete 1:test2.cfg
Console#