Sony HVR-Z7E - Manual (Page 13)

13
Ge
tt
in
g
S
ta
rte
d
8 Turn the focus ring C until the subject
comes in focus, then press the SEL/
PUSH EXEC dial G.
When the adjustment is completed,
[Completed.] appears on the screen.
If the adjustment fails, [Could not adjust.]
appears on the screen. Try the adjustment
again.
z Tips
• You can check the focusing easily if you do the
following before adjusting the focal length.
– Set [PEAKING] in the
(DISPLAY
SET) menu to [ON] (p. 81).
– Press the ASSIGN button to which
[EXP.FOCUS] is assigned (L2 button by
default) (p. 45).
• If the adjustment fails, confirm the following.
– A bright subject is not within the view.
– The ND filter switch does not stop at halfway
between two positions.
1
Attach the wind screen B to the
supplied microphone A.
2
Place the microphone A in the
microphone holder C with the
model name facing upward, close
the cover, and shut the clamp.
3
Connect the plug of the
microphone to the INPUT1 jack
D.
Push the plug in the jack until it is
securely locked.
4
Put the microphone cable into the
cable holder E.
5
Select the channel with the REC
CH SELECT switch F.
The channel to be used differs
depending on the relationship between
the REC CH SELECT switch positions
and the input jacks.
See the table below.
Attaching the supplied
microphone
LINE
INPUT2 INPUT1
MIC
MIC
LINE
MIC
MIC
INPUT2 INPUT1
Put the cable in the outer cable holder.
Continued ,