Sharp MD-SR50H - Manual (Page 28)

28 27
Useful Features
Battery Power
5
1 2 3 4
1
2
5
6
To the DC IN
5V socket
AC 230-240V,
50/60 Hz
To wall socket
Charging the rechargeable battery
When a separately available rechargeable battery
is used for the first time or when you use it after a
long period of disuse, be sure to charge it fully.
1
Slide the battery cover as far as it will go
to the outside.
2
Lift the battery cover.
● Do not force the battery cover open too far.
3
Insert the rechargeable battery from the
(+) marked side.
● A rechargeable battery other than the AD-N70BT
cannot be charged.
4
Close the battery cover.
5
Plug the AC adaptor into the wall socket,
and then insert the plug on the other end
into the DC IN 5V socket.
6
Press the :OFF/CHRG (• ■ ) button.
● “ ” will flash, and battery will begin charging.