Sony KDP 51WS655 - Manual (Page 15)

14
SETU
P
SETU
P
S
E
TU
P
SETU
P
Set
up
SETU
P
TV Controls and Connectors
Front Panel
Item Description
1 PRO STD/DUO Memory Stick insertion slot. For details, see “Inserting and Removing a Memory
Stick” on page 70.
2 Memory Stick LED When lit, indicates that the Memory Stick is being read. (Do not remove the
Memory Stick when the indicator is lit.)
3 FLASH FOCUS Press to adjust the convergence (see page 44).
4 TV/VIDEO Press repeatedly to cycle through the video equipment connected to the TV’s
video inputs.
5 -VOLUME + Press to adjust the volume.
6 -CHANNEL+ Press to scan through channels. To scan quickly through channels, press and
hold down either
CHANNEL button.
7 TIMER LED When lit, indicates one of the timers is set. When the timer is set, this LED will
remain lit even if the TV is turned off. For details, see page 97.
8 STAND BY LED Blinks when the TV is turned on, then shuts off when the picture is displayed. If
the LED blinks continuously, this may indicate the TV needs service (see
“Contacting Sony” on page 101).
9 POWER Press to turn on and off the TV.
0 Infrared Receiver (IR) Receives IR signals from the TV’s remote control.
PRO
STD/DUO FLASH FOCUS TV/VIDEO — VOLUME + — CHANNEL + TIMER STAND BY POWER
1 2 3 4 5 6 7 8 9 q;
AX1X_Digital.book Page 14 Wednesday, March 2, 2005 1:13 PM