Sony DMX-WL1 - Manual (Page 17)

17
Othe
r I
n
form
a
tion
Other Information
Attaching the Transmitter Unit
Stand
The transmitter unit can also be used vertically
with the supplied stand.
1 Match the Guide Pin on the center of the stand
and the screw hole on the right side of the
transmitter unit.
2 Secure the screw.
Attaching the Receiver Unit
1 Attach the supplied TV Mounting bracket to
the bottom left side of the TV rear panel.
Insert the two Plastic Fasteners (supplied) into
the holes to hold the TV Mounting bracket in
place. Push the head of the Plastic Fastener
with your finger until it clicks.
~
• Do not push the head of the Plastic Fastener until you
have inserted the fastener into the hole on the TV.
2
Align the slider on the bottom of the receiver
unit with the groove of the TV Mounting
bracket.
~
• To remove the bracket from the TV, use a Phillips
screw driver (not supplied) to loosen the Plastic
Fasteners.
Transmitter unit
Stand
Guide Pin
Screw
Attaching the Receiver Unit to the Rear
of the TV
Plastic
Fastener
Guide Pin
(continued)