Sony CDP-CX450 - Manual (Page 8)

Getting Started
8
To turn off the 2-way remote system
You may need to turn off the player’s 2-way remote
system depending on which components you connect
to this player. See “Understanding the 2-way remote
system” on page 7 to see if you need to do so.
Even though you turn off the player’s 2-way remote
system, you can use the remote supplied with the
player by pointing the remote toward the unit such as
a receiver that the 2-way remote system is turned on.
In this case, position the player in the proximity of the
unit that the 2-way remote system is turned on.
1
Press MENU/NO.
2 Turning the JOG dial until “2WAY OFF ?” appears
in the display window.
3 Press YES.
To return to normal setting
After following steps 1 and 2, and “2WAY ON ?” is
displayed, then press YES.
If you connect to the Sony CD player CDP-CX260 or
CDP-CX88ES, press OPERATE on the transmitter/
receiver to turn it off, and set the 2-way remote system
of the player to on.
Note
If you use this player with a receiver/amplifier, turn the
receiver/amplifier on when using this player.
MENU/NO YES
How to use the remote
Press ?/1 on the player to turn on the player.
If the following message appears in the remote’s
display while setting up the remote, point the remote
at the main player.
a n ' t r e c e i v e
e
l P a s e t u r n
t o a ma i n u n i t
h i
C
t s REMOT E
You can select an item shown in the remote’s display
by moving the cursor (B). To move the cursor down,
push the Easy scroll key downward. To move the
cursor up, push the Easy scroll key upward.
30 °
?/1
CONTINUE
PROGRAM
NAME SCAN
MENU
PUSH ENTER
TRACK
PLAYER SELECT
BACK
DISC
SKIP
SHUFFLE
REPEAT
SCROLL
MENU
Easy scroll
key
Note that the displayed message disappears
automatically if you don’t proceed for more than a few
moments.
JOG
I / 1
BACK
When you press BACK, the remote’s display returns to
the previous display.