Sharp MD-SR60E - Manual (Page 13)

13
Basic operation
12
Recording : continued
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this unit.
3
Press the REC LEVEL (
5 5 5 5 5
or
4 4 4 4 4
) button
to adjust the recording level (only ana-
logue connection).
● Adjust the recording level so that the maximum
sound volume from the source makes the read-
ing swing somewhere between –4 dB and 0 dB.
0dB
4dB
● For digital connection, it is not necessary to ad-
just the recording level.
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
● Here you can search for the track to record.
5
Press the
06 06 06 06 06
button.
6
Begin playback on the stereo system to
start recording.
To interrupt recording
Press the
06
button.
● The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the •
■ /:OFF button.
● When recording stops, “TOC” appears. Whilst “TOC”
appears, recorded contents haven’t been written on
the MiniDisc.
To write recorded contents on the MiniDisc
Press the •
■ /:OFF button whilst in the stop mode.
● The power turns off after recorded contents have been
written on the MiniDisc.
Level meter indicator
TOC display
**03-BASIC OPERATION 02.07.2000, 10:03 AM 13