Schumacher SE-70MA User Manual

Page 17

Advertising
background image

13

PROBLEM

POSSIBLE CAUSE

REASON/SOLUTION

Short or no start cycle

when cranking engine.

Drawing more than the

Engine Start Rate.

Failure to wait 4 minutes

(240 seconds) between

cranks.

Clips are not making a

good connection.

AC cord and/or extension

cord is loose.

No power at receptacle.

The charger may be

overheated.

Battery may be severely

discharged.

Crank time varies with the

amount of current drawn. If

cranking draws more than

the Engine Start Rate, crank

time may be less than 3

seconds.

Wait 4 minutes of rest

time before the next crank

to allow the battery and

charger to cool down.

Check for poor connection

at battery and frame.

Check power cord and

extension cord for loose

fitting plug.

Check for open fuse or

circuit breaker supplying AC

outlet.

The thermal protector may

have tripped and needs a

little longer to close. Make

sure the charger vents are

not blocked. Wait and try

again.

On a severely discharged

battery, charge for 10 to

15 minutes in the highest

manual rate to help assist in

cranking.

BEFORE RETURNING FOR REPAIRS

16.

When a charging problem arises, make certain that the battery is capable

16.1

of accepting a normal charge. Use a good battery to double check all

connections, AC outlet for a full 120-volts, charger clips for correct polarity and

the quality of the connections from the cables to the clips and from the clips to

the battery system. The clips must be clean.
When a battery is very cold, partially charged or sulfated, it will not draw

16.2

the full rated amperes from the charger. It is both dangerous and damaging

to a battery to force higher amperage into it than it can effectively use in

recharging.
When an UNKNOWN OPERATING PROBLEM arises, please read the

16.3

complete manual and call the customer service number for information that will

usually eliminate the need for return.

If the above solutions do not eliminate the problem or for information about troubleshooting

or replacement parts, call toll-free from anywhere in the U.S.A.

1-800-621-5485

7:00 am to 5:00 pm Central Time Monday thru Friday

Advertising
This manual is related to the following products: