S 55–5 – Sony STR-DA2100ES User Manual

Page 55

Advertising
background image

Ope

ra

tions

Us

ing

the
Re

m

o

te

RM-AAE0

0

1

masterpage:Right

lename[E:\SEM_Janet\Revision

Data\J9050000_2580805131DA2100ES_US\2580805131\US08REM_STR-DA2100ES-U.fm]

55

US

model name1[STR-DA2100ES]

[2-580-805-13(1)]

To cancel programming

Press RM SET UP during any step. The remote
automatically exits the programming mode.

To activate the input after
programming

Press the programmed button to activate the
input you want.

If programming is unsuccessful,
check the following:

• If the indicator does not light up in step 1, the

batteries are weak. Replace both batteries.

• If the indicator flashes 4 times in quick

succession while entering the numeric code,
an error has occurred. Start again from step 1.

Notes

• The indicator turns off while a valid button is

pressed.

• In step 2, if you press TV ?/1, only TV VOL +/– ,

TV CH +/–, TV/VIDEO and WIDE buttons are
reprogrammed.

• For the numeric codes, only the first three numbers

entered are valid.

To clear the memory of the
remote

To clear all programmed and learned signals, do
the following to reset the remote to factory
settings.

Press ?/1, AV ?/1 and MASTER VOL – at
the same time.

The indicator flashes 3 times, then goes off.

The numeric codes
corresponding to the component
and the maker of the component

Use the numeric codes in the tables below to
control non-Sony components and also Sony
components that the remote is normally unable
to control. Since the remote signal that a
component accepts differs depending on the
model and year of the component, more than one
numeric code may be assigned to a component.
If you fail to program your remote using one of
the codes, try using other codes.

Notes

• The numeric codes are based on the latest

information available for each brand. There is a
chance, however, that your component will not
respond to some or all of the codes.

• All of the input buttons on this remote may not be

available when used with your particular component.

To control a CD player

To control a DAT deck

To control an MD deck

Maker

Code(s)

SONY

101, 102, 103

DENON

104, 123

JVC

105, 106, 107

KENWOOD

108, 109, 110

MAGNAVOX

111, 116

MARANTZ

116

ONKYO

112, 113, 114

PANASONIC

115

PHILIPS

116

PIONEER

117

TECHNICS

115, 118, 119

Maker

Code(s)

SONY

203

PIONEER

219

Maker

Code(s)

SONY

301

DENON

302

JVC

303

KENWOOD

304

continued

US01COV_STR-DA2100ES-U.book Page 55 Wednesday, July 13, 2005 2:17 PM

Advertising