Dividing a track directly – Sony MZ-NH900 User Manual
Page 71
71
While playing or pausing, press T MARK
on the recorder at the point you want to
mark.
“MARK ON” appears in the display, and
a track mark is added. The track number
will increase by one.
1
While playing, press T MARK for 2
seconds or more.
Four seconds of the track from the
point T MARK is pressed is played
back repeatedly.
2
Press the 5-way control key towards
. or > to adjust the point to
divide.
Pressing the control key moves the
dividing point forward or backwards.
The dividing point can be moved up
to a maximum of 8 seconds forward
or backwards from the point
T MARK was pressed in step 1.
3
Press NENT to enter the dividing
point.
z
You can use the Speed Control function during
the Divide Rehearsal function. This allows you
to reduce the playback speed (page 56) to carry
out the division more accurately.
To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder at the
point you want to add a track mark.
You can use Time Mark to add track
marks automatically at specified intervals
(except while digital recording) (page 39).
Dividing a track directly
Adjusting the dividing point
before dividing a track
(Divide Rehearsal)
The point T MARK is pressed.
Four seconds of the track plays back
repeatedly.
The point
T MARK is
pressed in
step 1.
The moved four-second interval plays back
repeatedly.
The dividing point shifts a
maximum of 8 seconds
forward or backwards.